• The POWER switch is automatically turned off to secure safety.
• Energy saving function is provided. The heater temperature is dropped to the READY level during standby. (The temperature is auotmatically reset when the operator picks up the iron.)
• If the operator starts working before the iron tip reaches the set temperature, the buzzer sounds.
• Temperature control using codes is possible.
• Leak current is minimized due by using a 24V heater.
• Proportion control, selection of turning on and off are possible.
• The temperature of the iron tip can be set freely from 200 to 450°C.
• Temperature units displayed can also be changed between °C and °F.
• The heater temperature rises very quickly.
• Any trouble is including heater burn-out, abnormal temperature, sensor burn-out and short circuiting, and the power is automatically disconnected after one minute.
• Sufficient countermeasures have been provided to prevent Electrostatic Discharge (E.S.D.).
• This item has a current CE Marking approval.

   

The table shows the results of the test on the "heater temperature warm-up property" of the UNICON-107(S)/ HANDY MAX(S).
Look at the excellent "high-speed heating". It takes only some 20 seconds for the tip of the iron to warm up to the optimum temperature of 300°C after the switch is turned on. This marvelous high-speed heating property is sure to help widely improve your production efficiency and acceptance rates of your products.