|
|
Dispensing Valve Selection Chart (PDF, 211 KB)
Don't know which valve is best for your material or process? The I&J Fisnar valve chart shows all of our valves, along with the materials and applications they are designed for. The chart will open in a new window for easier viewing.
|
| |
|
|
|
Diaphragm Valves
Diaphragm valves provide precision micro-shot dispensing of liquids such as cyanoacrylates, solvents, electrolytes, alcohols, and acids. A single part diaphragm and seal separates the wetted parts for reduced maintenance. Diaphragm valves for UV cure and anaerobic materials are also available.
|
| |
|
|
|
High Pressure Valves
Designed for dispensing high viscosity materials, these high pressure valves are can accept over 3,000 PSI of fluid pressure. The 790HPNM spool valve is engineered for high viscosity silicones and greases. The LV0126NM needle valve is suitable for small shots and beads of high viscosity. The valve is adjustable for shot size tuning. |
| |
|
|
|
|
Positive Displacement Valves
Positive displacement valves are available as either servo driven auger valves or peristaltic dispensing pumps. An auger valve is a servo motor driven valve suitable for dispensing high viscosity pastes. A peristaltic dispensing pump is a volumetric valve with an adjustable chamber for accurate deposits.
|
| |
|
|
|
Needle Mini Valve
A lightweight needle valve designed for hand-held dispensing of micro-shots and small beads of medium viscosity materials. The valve is available with stainless steel wetted chambers for UV cure dispensing, plastic chambers for anaerobic dispensing, or aluminum for dispensing silicones, grease and lubricants.
|
| |
|
|
|
Cartridge Valve
A lightweight valve that is suitable for hand held operations or can be integrated into high cycling automated dispensing applications. The cartridge valve has a maximum fluid pressure of 300psi and can dispense low and medium viscosity fluids such as silicone, RTV, oils, grease, and |
| |
|
|
|
|
Pinch Tube Valve
A pinch tube valve can be used in many situations, it is regularly used for volatile fluids, such as in cyanoacrylate and solvent dispensing. The advantage of this valve is that the wetted parts are replaceable at a low cost. Because of this, the valve can also be used with two-part resins and placed at the end of a static mixing nozzle.
|
| |
|
|
|
Spray Valves
I&J Fisnar Spray Valves are designed for dispensing urethane, paint, flux, and lubricants and for conformal coating applications. All spray valves are made of stainless steel and provide close tolerance spray dispensing. The spray nozzles are specially engineered to prevent material clogging and a stroke adjustment provides accurate dispensing. |
| |
|
|
|
Poppet Valves
Poppet valves are multipurpose valves suitable for small shots and bead dispensing of medium or high viscosity fluids such as silicones, grease and paste. Poppet valves can dispense up to 300 times per minute and are developed with a suck-back feature to prevent post-dispense dripping. |
| |
|
|
